manualshive.com logo in svg

OKIDATA OL400e Series, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA OL400e Series Скачать руководство пользователя страница 335

Page: 208

Service Manual for OL400e/OL410e/OL410e-PS

Chapter 4 Failure & Repair Analysis

 

4.8.02  Continuous Print Test

The Continuous Print Test will continuously print the ASCII Character Set (shifting the characters 
one position to the right on each subsequent line). This test can be used to examine the character 
density across an entire page.

To perform the Continuous Print Test, follow this procedure.

- Press and hold 

RECOVERY

 while powering ON the printer. This will place the printer 

  in the System Maintenance Mode.

- Press 

MENU1 / MENU2

 until CONT PRT is displayed on the operator panel.

- Press

 ENTER.

- The message shown below will be displayed on the operator panel.

WARM-UP

- The message shown below will be displayed on the operator panel.

CONT PRT PRINTING

- Printing will begin.

- To stop the Continuous Print Test, press ON-LINE.

Содержание OL400e Series














































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды