manualshive.com logo in svg

OKIDATA OL400e Series, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA OL400e Series Скачать руководство пользователя страница 275

Page: 178

Service Manual for OL400e/OL410e/OL410e-PS

Chapter 4 Failure & Repair Analysis

 

4.4.07 Paper Jams Under the Fuser Roller

NOTE: 

 

The information in this section is also covered in TSB 5614 / FCO 8172 

.

Symptoms

The paper jams under the fuser roller and must be removed by a technician.

The leading edge of the paper is stuck in the area of the paper exit lever.

The rest of the page "bunches up" under the fuser roller.

The end user cannot remove the paper. Not enough paper is visible/available for 
the end user to grasp and remove.

Solution

Install the recommended exit sensor lever assembly and/or firmware (listed below).

Lever: Exit Sensor (Assembly)

P/N 51010802

Firmware (OL400e)

P/N 31097905

Self-Test Revision Number 3.03 or higher.

Firmware (OL410e)

P/N 31098302

Self-Test Revision Number 2.0 or higher.

Some printers may require only sensor levers. Some may require only firmware.

Check the Self-Test Revision Number BEFORE changing the firmware. The printer 
may already include the recommended firmware.

Printers with serial numbers HIGHER than those listed below will require the installation 
of the recommended firmware. The recommended sensor is already installed.

OL400e 120 volt

310A0086272

OL400e 2XX volt

310A0000245

OL410e 120 volt

308A0005201

OL410e 2XX volt

312A0000129

ALL printers with a serial number 404xxxxxxx include both the recommended sensor 
and the recommended firmware.

Содержание OL400e Series














































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды