manualshive.com logo in svg

OKIDATA OL400e Series, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA OL400e Series Скачать руководство пользователя страница 273

Solution

To correct this problem, follow this procedure.

- Remove the image drum unit from the printer.

- Turn the drum so the pinch rollers face up.

Be careful NOT to spill toner.

Do NOT touch the surface of the drum.

Touching the drum may cause permanent damage to the drum's surface.

- Use a pair of needle-nose pliers to press the retaining clip against the plastic ribbing 
  closest to the clip. If done correctly, there will little or no space between the retainer clip 
  and the plastic rib.

- Repeat the process until all four clips have been levelled.

- Place the drum back into the printer.

- Test the printer be running the Print Fonts Test.

- Load paper in the cassette.

- Take the printer OFF-LINE.

- Press PRINT FONTS.

Содержание OL400e Series














































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды