OKIDATA Okipage6e, Руководство по обслуживанию

Страница: 38 / 250

Page: 17
Service Guide OKIPAGE6e
Chapter 2 Operation Description
The paper jam detection function monitors the paper condition when the power is turned on and during
printing. When any of the following conditions arises, this function interrupts the printing process. If any of
the following errors is encountered, printing can be recovered by removing the jammed paper (by opening
the upper cover, removing the jammed paper and closing the upper cover).
Error Cause of error
Paper input jam The paper is in contact with the inlet sensor when the power is
turned on.
After hopping operation is attempted three times, the leading edge
of the paper does not reach the inlet sensor.
Paper feed jam The paper is in contact with at the paper sensor when the power is
turned on.
The leading edge of the paper does not reach the paper sensor
within a
predetermined distance since the paper has reached the inlet
sensor.
The trailing edge of the paper does not pass over the paper sensor
within a
predetermined distance after the same has passed over the inlet
sensor.
The leading edge of paper does not reach the outlet sensor within a
predetermined distance after the paper has reached the paper
sensor.
Paper exit jam The paper is in contact with the outlet sensor when the power is
turned on.
The paper does not pass over the outlet sensor within a
predetermined distance after the leading edge of the paper has
reached the outlet sensor.
The paper size check for manual feeding finds that the paper size is
free size.
Paper size error The size of the paper is monitored by the inlet sensor 1. The paper
is not detected by the inlet sensor 1 within predetermined distance.
The inlet sensor 2 detects that the size of the loaded paper is A4 or
larger, or
smaller than A4. The detected paper size differs from the paper size
set by
command or menu.
The paper size check for manual feeding finds that the paper size is
free size.
Paper Feed Timing Chart