OKIDATA Okipage6e, Руководство по обслуживанию

Страница: 106 / 250

Toner Sense A fault occurred in the
toner sensor. Normal
operation can be
continued. Replace the power supply
board.
Ready Change Drum
Unit Image drum is running
out. Normal operation
can be continued. Replace the image drum unit.
After replacing the drum unit,
reset the drum counter. (Refer
to the User's Manual.)
LCD Status Messages (Table 6-2)
Category LCD status message Trouble or status Remedy
Controller errors An error occurred in the
controller. n = Exception
Code aaaaaaa = Error
Address Normal operation
cannot be ensured.
Turn the power off,
then back on to
restart.
If normal operation
is not recovered by
this restart
procedure, replace
the Main Control
PCB.
An error occurred in the
controller. Turn the power off,
then back on to
recover from the
error.
If the normal
operation is not
recovered by this
restart procedure,
use the following
remedial actions.
Cover open The upper cover was
opened. Close the cover to
release the error
display.
If the display does
not change after this
procedure, replace
the power supply
board.
Jam errors A jam occurred during
paper hopping from the
tray being displayed tray:
TRAY 1, TRAY 2,
FEEDER Check the paper in
the cassette. Open
and then close the
cover. When the
cover is closed,
recovery printing is
carried out and the
error display is
released.
If this error occurs
frequently, see 6.5.2
2-1.