OKIDATA Okipage6e, Руководство по обслуживанию

Страница: 31 / 250

Page: 16
Service Guide OKIPAGE6e
Chapter 2 Operation Description
Hopping and Feeding
Hopping and feeding motions are actuated by a single registration motor in the mechanism as shown
below:
The registration motor turning in direction "a" drives the hopping roller. The registration motor turning in
direction "b" drives the registration roller. The registration and hopping gears have one-way bearing, so
turning any of these gears in the reverse direction will not transmit the motion to the corresponding roller.
Hopping
For hopping, the registration motor turns in direction "a" (CW direction) and drives the hopping roller to 1.
advance the paper until the inlet sensor turns on (in this case, the registration gear also turns, but the
registration roller is prevented from turning by the one-way bearing).
After inlet sensor is turned on by the paper advance, the paper is further advanced to a predetermined 2.
distance until the paper hits the registration roller (the skew of the paper can thus be corrected).
Feeding
When hopping is completed, the registration motor turning in direction "b" (CCW direction) drives the 1.
registration roller to advance the paper (in this case, the hopping gear also turns, but the hopping