OKIDATA Okipage6e, Руководство по обслуживанию

Страница: 111 / 250

This message is
displayed together with
other message on the
first line. Normal
operation can be
continued. Replace the image
drum cartridge.
After replacing the
drum cartridge, reset
the drum counter
(refer to the User's
Manual).
The printer is in the
power-saving mode.
This message is
displayed together with
other message on the
first line. Normal operation.
(OKIPAGE6ex in PS
mode)
PostScript mode only
This message will appear
when the interpreter
detects an error during a
job processing. The
remainder of the job will
be ignored. Check the printer
setting of the host.
Check the printer job
data to see if there is
any unsupported or
illegal operation in
the data.
Table 6-2 (Cont'd)
Category LCD status
message Code (nn) Error Remedy
Controller errors 0n A fault occurred in
the controller.
n = Exception Code Replace the Main
Control PCB.
10 An error was
detected by
program ROM
check. Replace the Main
Control PCB.
20 An error was
detected by font
ROM check. Replace the Main
Control PCB.
30 An error was
detected by resident
RAM check. Replace the Main
Control PCB.
40 An error was
detected by
EEPROM check. Replace the
EEPROM or
Main Control
PCB.
EEPROM
50 An error was
detected by optional
software ROM
check. Check the optional
software ROM
board for proper
connection or
replace it.