manualshive.com logo in svg

OKIDATA Okipage6e, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA Okipage6e Скачать руководство пользователя страница 215

Page: 129

Service Guide OKIPAGE6e

Chapter E Multi-Purpose Feeder Maintenance

 
While only the removal procedure for roller-A is described here, the removal procedure for roller-B is 
basically same. 
When removing roller-B, however, be careful not to deform the sensor lever.

(1) Remove the upper frame (see 3.3.2 steps (1) through (3)).

(2) Remove the separator assembly (see 3.3.2).

(3) Remove the OLEV-11 PCB (see 3.3.3.).

(4) Remove the motor bracket (see 3.3.5).

(5) Remove the gear 1.

(6) Shift the roller-A 2 to the right, lift it on its left side and slide it out (the bearing 3 also comes off while 
you are doing this, so 
be careful not to lose it).

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Содержание Okipage6e



























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды