OKIDATA Okipage6e, Руководство по обслуживанию

Страница: 103 / 250

FAN Motor Error A fault occurred in the
fan motor. Check the fan motor for proper
connection and for any
presence
of foreign matter in the fan.
(See 6.5.2-5.)
Replace the fan motor or the
Main Control PCB.
Fuser Error A fault occurred in the
fusing unit. (Time-out
error, etc.) See 6.5.2-4.
Thermistor Open
Check Error A fault occurred in the
fusing unit. (Thermistor
open check error) See 6.5.2-4.
Thermistor Short
Check Error A fault occurred in the
fusing unit. (Thermistor
short check error) See 6.5.2-4.
SSIO Interface Error Power supply board
SSIO I/F error Replace the power supply board or
the Main Control PCB.
Second Tray Time-out
Error I/F time-out occurred
between the Main
Control Board and the
2nd Tray. Check the 2nd tray for proper
connection.
Multipurpose Feeder
Time-out Error I/F time-out occurred
between the Main
Control Board and the
multi feeder. Check the multi feeder for proper
connection.
Watch Dog Time-out
Error A watch dog time-out
occurred. Turn the power off, then back
on to recover from the error.
Replace the Main Control PCB.
When replacing the Main
Control PCB, upload/download
the EEPROM data. (Refer to
4.3.1-4.)
Cover Open Cover Open The upper cover was
opened. Check the cover to release the
error display.
If the display does not change
after this procedure, replace
the power supply board.
Jam errors Paper Input Jam A jam occurred during
paper hopping from the
tray being displayed.
Tray: Tray1, Tray2,
Feeder Check the paper in the
cassette. Open and then close
the cover. When the cover is
closed, recovery printing is
carried out and the error
display is released.
If this error occurs frequently,
see 6.5.2 2-1.