manualshive.com logo in svg

Oki MB461MFP, Руководство по обслуживанию

Многофункциональный принтер Oki MB461MFP - надежное устройство для офиса. У нас вы можете бесплатно скачать руководство пользователя и Материальную безопасностьных данных на {веб-сайте}. Отличное качество печати и многофункциональность делают этот принтер незаменимым помощником в работе.

Поделиться
Скачать
background image

Oki  Data  CONFIDENTIAL

44871001TH Rev.6 

10-8

10. APPENDIX

*1  :  Network factory defaults: "Admin Setup" - "Network Menu" - "Network Setup" - "Factory 

Defaults"

 

:  It is executed to reset only network settings to the factory defaults make settings again 

due to unsuccessful network access.

*2  :  SD Card initialization: "Admin Setup" - "Management" - "SD Memory Card Setup" - 

"Initialize"

*3  :  SD Card format: "Admin Setup" - "Management" - "SD Memory Card Setup" - "Format 

Partition"

*4  :  SD Card data erasing: "Admin Setup" - "Management" - "Storage Maintenance Setup" - 

"Erase SD Memory Card"

 

:  Not displayed when Job Accounting is operating.

 

:  Users must execute this menu with "Erase Privacy Data" before disposing of the device to 

prevent personal information from leaking.

      Instead of the said timing, users must execute this menu when disposing of SD cards after 

replacement.

*5  :  FLASH initialization: "Admin Setup" - "Management" - "Flash Memory Setup" - "Initialize"

*6  :  Language initialization: "Admin Setup" - "Management" - "Language Maint Setup" - 

"Initialize"

 

:  This menu is executed when users want to delete downloaded language data and reset 

the display language back to English temporarily.

*7  :  Reset Settings: "Admin Setup" - "Management" - "Reset Settings"
 

:  This menu is executed to reset the device settings (including network settings) back to the 

defaults temporarily and make settings again when device operation is unstable, etc.

*8  :  Erase Privacy Data: "Admin Setup" - "User Install" - "Erase Privacy Data"
 

:  Not displayed when Job Accounting is operating.

 

:  Users must execute this menu with "Erase SD Memory Card" before disposing of the 

device to prevent personal information from leaking.

*9  :  Main counter reset: "Admin Setup" - "Management" - "Print Statistics" - "Reset Main 

Counter"

 

:  Not displayed in MPS mode.

*10  :  Consumable replacement reset: "Admin Setup" - "Management" - "Print Statistics" - "Reset 

Supplies Counter"

 

:  Not displayed in MPS mode.

*11  :  Job log deletion: "Admin Setup" - "Management" - "Job Log Setup" - "Clear Job Log"
 

:  This menu is executed when users want to delete only the usage history of the device.

*12 :  Format SD Card: "Service Maintenance" - "System Maintenance" - "Format SD Memory 

Card"

*13 : Format Flash ROM: "Service Maintenance" - "System Maintenance" - "Format Flash 

Memory"

*14 :  Reset Admin Password: "Service Maintenance" - "System Maintenance" - "Reset Admin 

Password"

 

:  This menu is used to initialize only the administrator password by support when users 

forget the administrator password.

*15  :  ALL RESET: "Service Maintenance" - "System Maintenance" - "All Reset"
 

:  Not displayed in MPS mode.

 

:  This menu must be executed to delete customer information before dealers etc. lend 

devices to the next customers.

*16  :  OKIUSER change: "Service Maintenance" - "System Maintenance" - "OKIUSER"
 

:  Not displayed in MPS mode.

*17  :  Country code change: "Admin Setup" - "Fax Setup" - "Fax Setting" - "Country Code"

*18  :  Settings are initialized when their defaults are changed due to changes in destinations or 

country codes.

*19 :  Only "File Name", "Template" under "Admin Setup" - "Scanner Setup" - "E-mail Setup" is 

initialized.

*20 :  IC Card Authentication Program stored on SD card is NOT deleted.  Except for JP1,the 

version of IC Card Authentication Program wouldn't be printed in Configuration Report.

*21  :  No means is provided to change the setting of the print statistic password.

*22 :  Executing Format Flash ROM displays the total number of replacement retained in the CU 

FW of the device.

 

  Consumable replacement information (toner/drum/belt/fuser) in a print statistic report 

shows a calculation result of the formula "actual PU replacement - CU display difference = 
replacement information."

 

  Format Flash ROM clears the value of "CU display difference."

*23 :  "PS Setup" - "L1 Tray" cannot be initialized by "Reset Settings"/"ErasePrivacy Data"/"All 

Reset."

*24 :  In this item, the following Counters that belongs to Job Accounting's maintenance category 

is showed.

 

 

Total Color A4/Letter Impressions 

 

 

Total Mono A4/Letter Impressions

 

 

Total ADF Pages Scanned [A4/Letter Conversion]

 

 

Total Pages Scanned [A4/Letter Conversion]

*25 : "Admin Setup" - "Management" - "System Setup" - "Access Control" is NOT included. The 

resetting condition is same as 「Access control information registration data「.

*26 : "Service Maintenance" - "Print Maintenance" - "Dot Shift" is NOT resetted.

*27 : "Erase Privacy Data" would NOT be showed in panel menu if Job Accounting is enabled.

*28 : JobLog be deleted during reboot, for the item of JobLog's [store/no store]  be resetted to [no 

store].

Содержание MB461MFP















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MB461MFP

IBM 3160 Introduction And Planning Manual preview
3160
Бренд: IBM Страницы: 102
Oki B410D Specifications preview
B410D
Бренд: Oki Страницы: 4
Xerox ApeosPort-III C7600 User Manual preview
ApeosPort-III C7600
Бренд: Xerox Страницы: 369
Posnet TEMO ONLINE Quick Start Manual preview
TEMO ONLINE
Бренд: Posnet Страницы: 2
Kyocera Mita Ecosys FS-1800+ Installation Manual preview
Ecosys FS-1800+
Бренд: Kyocera Mita Страницы: 31
Lanier GX3050N Brochure preview
GX3050N
Бренд: Lanier Страницы: 4
Xerox 6250N - Phaser Color Laser Printer Service Manual preview
6250N - Phaser Color Laser Printer
Бренд: Xerox Страницы: 467
Epson 10600 - Stylus Pro Color Inkjet Printer Specification Sheet preview
10600 - Stylus Pro Color Inkjet Printer
Бренд: Epson Страницы: 8
Epson 1400 - Stylus Photo Color Inkjet Printer Specifications preview
1400 - Stylus Photo Color Inkjet Printer
Бренд: Epson Страницы: 8
Epson 10600 - Stylus Pro Color Inkjet Printer Printer Manual preview
10600 - Stylus Pro Color Inkjet Printer
Бренд: Epson Страницы: 183
Epson 1010 User Manual preview
1010
Бренд: Epson Страницы: 279
Epson 1400 - Stylus Photo Color Inkjet Printer Brochure & Specs preview
1400 - Stylus Photo Color Inkjet Printer
Бренд: Epson Страницы: 4
Gestetner G056 Service Manual preview
G056
Бренд: Gestetner Страницы: 335
Brother PocketJet 3 Plus Brochure & Specs preview
PocketJet 3 Plus
Бренд: Brother Страницы: 11
Brother PocketJet 3 Specifications preview
PocketJet 3
Бренд: Brother Страницы: 2
Brother PT-2430PC - P-Touch 2430PC B/W Thermal Transfer Printer (Spanish) Guía Del Usuario preview
PT-2430PC - P-Touch 2430PC B/W Thermal Transfer Printer
Бренд: Brother Страницы: 2
Brother PocketJet 6 Specifications preview
PocketJet 6
Бренд: Brother Страницы: 4
Brother PJ-722 Online User'S Manual preview
PJ-722
Бренд: Brother Страницы: 165

Бренды по названию

Популярные бренды

Загрузить еще бренды