2-10
Status level Error code
LCD
LED
Function
Ready Atten
Error
460
LOAD %MEDIA_SIZE%/
%MEDIA_TYPE%
AND PRESS ONLINE
SWITCH
%ERRCODE%:%TRAY%
SIZE MISMATCH
Off
Blink The size of paper or media type in
the tray does not match the print
data.
Load paper in tray
(It takes a while until the status
disappears after you have closed
the tray and the lever lifted.)
Error 460 : MP TRAY
After replacing the form, the user
should press the ONLINE key.
Error
420
REDUCE PRINT DATA
%ERRCODE%:MEMORY
OVERFLOW
Off
Blink Memory capacity overflows due to the
following reason.
Press ON-LINE switch so that it
continues. Please reduce print data.
- Too much print data in a page.
- Too much Macro data.
- Too much DLL data.
- After frame buffer compression,
over flow occurred.
- EmailToPrint.
Error
(ONLINE)
DOWNLOAD
MESSAGE
PROCESSING
Varies Varies Indicates that message data to be
updated is being processed.
Error
(ONLINE)
DOWNLOAD
MESSAGE
WRITING
Varies Varies Indicates that message data to be
updated is being written.
Error
(ONLINE)
DOWNLOAD
MESSAGE
SUCCESS
Varies Varies Indicates that message data to
be updated has been written
successfully.
Error
(ONLINE)
DOWNLOAD
MESSAGE
FAILED %CODE%
Varies Varies Indicates that writing of message
data to be uploaded has been failed.
%CODE% is a decimal value (one
digit) and represents the cause of
failure in writing.
= 1 … FAIL: Other errors.
= 2 … DATA_ERROR: Hash check
error in data reading/writing, or
abnormal FLASH
= 3 … OVERFLOW: Downloading
failure due to FLASH memory full
at starting or during writing in a
language file
= 4 … MEMORYFULL: Memory
reservation failure
= 5 … UNSUPPORTED_DATA:
Downloading data unsupported on
the printer
Status level Error code
LCD
LED
Function
Ready Atten
Error
(ONLINE)
NETWORK CONFIG
WRITING
Varies Varies This appears during the NIC
configuration data is storing into
the flash memory, as the setting
was changed.
Error
(ONLINE)
WAIT A MOMENT
NETWORK INITIAL
Varies Varies This appears when the NIC
initialization is occurred, as the
setting was changed.
Error
517
PRESS ONLINE SW
%ERRCODE%:WIRELESS
STARTUP ERROR
Off
Blink An error occurred at the
communication with wireless
bridge. For example, response
timeout, etc.
This status only for wireless LAN
printer.
Error
(ONLINE)
506
PRESS ONLINE SW
%ERRCODE%:NOT
CONNECTED TO
WIRELESS ACCESS
POINT
Off
Blink Can not setup communication with
an Access Point(there is not an
usable AP).
This status only for wireless LAN
printer.
Error
(ONLINE)
519
PRESS ONLINE SW FOR
RESTORATION
%ERRCODE%:RECEIVING
DATA TIMEOUT
Varies Blink When receiving data by Port9100,
LPR, FTP, IPP, WSD, or Email, a
timeout occurred in stream.
Error
(ONLINE)
302
PLEASE TRY AGAINE
%ERRCODE%:FW
UPDATE ERROR.IF
NETWORK DOESN'T
WORK,PLEASE TRY
FW UPDATE OVER
USB
Varies Varies FW Update was failed.
When this error occured, the FW
Update needs to be executed
again, and the printer needs to
keep On-Line.
Error
581
CLOSE FACE UP
STACKER
%ERRCODE%:DUPLEX NOT
AVAILABLE
Off
Blink It is occurred when duplex printing
pages are added at the face up
stacker cover opened.
2. Procedures for Repairing
