3-14
:
Paper level indicator lever
:
Driven roller
:
Driving roller (Continuous rotation)
:
Driving roller (Control rotation)
:
Paper conveying route
:
Indicating lever
:
Photo sensor
:
Micro switch
:
Magnetic clutch
:
Micro switch
Front
Back
Face up stacker
Eject Assy opening
-closing sensor
2nd Hopping
sensor
2nd
Entrance sensor
Face up stacker
opening-closing sensor
Paper end Sensor
Stacker Cover
opening-closing sensor
Paper end / Cassette
presence - absence sensor
Cassette
presence
- absence sensor
Face down stacker
Ejecting
sensor lever
Multipurpose tray
MPT Paper end
Tray 1
Tray 2 (option)
Entrance
sensor lever
Writing out sensor lever
3.1.6.3 Switch scan test
This self-diagnostic menu is used to check the entry sensor and the switch.
1. Enter the self-diagnostic mode (level 1), press the [MENU
] or
[MENU
]
key
repeatedly ,and press the [OK] key when the "SWITCH SCAN" is displayed in
the upper row of the display area. (Pressing the [MENU
]
key increments the
test item and pressing the [MENU
]
key decrements the test item.)
SWITCH SCAN
2. Press either the [MENU
]
or [MENU ] key until the desired menu item
corresponding to the unit to be tested in Table 3-3 is displayed in the lower row
of the display area. (Pressing the [MENU
]
key increments the test item and
pressing the [MENU
]
key decrements the test item.)
3. Pressing the [OK] key starts the test. Name and present status of the
corresponding unit are displayed.
PAPER ROTE:PU
1=H 2=L 3=H 4=L
Activate the respective units. (Figure 3-1) Status of the respective units are
displayed on the corresponding areas of the LCD display. (Display changes
depending on each sensor. Refer to Table 3-3 for details.)
4. Press the [CANCEL] key to return to the status of step 2.
5. Repeat steps 2 to 4 as required.
6. Press the [ ] key to exit the test. (Returns to the status of step 1.)
Figure 3-1 Switch and sensor location diagram
3. ADJUSTMENT
