Hole B
④
Tab
4.2.4 Cover-Side-R / Cover-Lower-R (B512 only)
(1) Remove the cassette.
(2) Open MPT, the Cover-Assy-Stacker and the Cover-Assy-Rear.
(3) Remove the Cover-WLAN
①
.
(4) Remove the screw (Silver)
②
.
(5) Insert the Minus Driver into the hole A of Guide-Cassette-R. (B512 only)
(6) Push the tab a to inside and disengage the three tabs (b,c,d) and tab e,
and remove Cover-Side-R
③
by opening it from the front side of the printer
in the direction of the arrow.
②
③
②
a
b
d
c
e
①
Hole A
*The next step is B512 only.
(7) Insert the Minus Driver into the hole B of Guide-Cassette-R and disengage
the five tabs and remove the Cover-Lower-R
④
in the direction of the
arrow.
(8) Assembling is Cover-Side-R first, next to assemble the Cover-Lower-R.
(Note on removing / assembling)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
2. When remove and assemble, Cover-Side-R first, next to the Cover-
Lower-R.
4-7
4. REPLACEMENT OF PARTS
