Oki CX 1145 MFP, Руководство администратора

Страница: 118 / 323

Setting up from TopAccess 117
2) Offset
Select the desired offset (time difference) from the local standard time. You can select from
between -2 and +2 hours, excluding 0 hour, in 30-minute increments. The default setting is
+1 hour.
3) Dates
Select the applicable period for the daylight savings time.
- Start: Select or enter the start date and time of daylight savings time.
- End: Select or enter the end date and time of daylight savings time.
y If you change the settings during the daylight saving time period, the changes will be
reflected to the equipment's clock. If you disable the settings during the applicable
period, the equipment's clock will shift to the standard time.
y If the equipment is turned off at the start or end date and time, the equipment will shift the
clock the next time it is turned on.
y After the clock shifts, the daylight saving time will also apply to the weekly timers.
y Select the Start and the End dates and times based on the time set for the equipment.
P.116 “Setting up the Time and Date”
y If the same month is specified for the Start and the End dates, the equipment does not
shift the clock automatically.
Setting up the Web General Setting
You can set the displayed language of TopAccess, and session timer to automatically log out
from the administrator mode.
1) WEB Language
Select the displayed language of TopAccess.
2) Session Timer
Enter how long you want this equipment to preserve the session data of TopAccess. You
can enter any integer between 5 to 999. This setting also applies to the session data of e-Fil-
ing web utility.
1
2