Oki CX 1145 MFP, Руководство администратора

Страница: 85 / 323

5 Registering from TopAccess
84 Managing Address Book
y You must specify either the “First Name” or “Last Name” field and either the “Email
Address” or “Fax Number” field to register the contact.
y You cannot send originals to the fax numbers without the optional Fax unit even if you
set up the contact that the fax number is specified.
y If you enter “-” in the “Fax Number” and “2nd Fax Number”, three seconds pause is
added for dialing the fax number.
y You can clear the entered values in each field by clicking [Reset].
y You can cancel adding or editing a contact by clicking [Cancel].
4
If you are registering a fax recipient, click [Fax Setting]. Otherwise,
skip to Step 6.
y The Fax Settings page is displayed.
5
Enter following items according to the capabilities of recipient fac-
simile, and click [Save].
SUB — Enter the mailbox number if you want to send originals to the mailbox in the
recipient facsimile. You can enter up to 20 characters including numbers and
hyphenations (-), #, *.
SID — Enter the password to input a fax into the mailbox in the recipient facsimile. You
can enter up to 20 characters including numbers and hyphenations (-), #, *.
SEP — Enter the mailbox number if you want to retrieve a document from the mailbox in
the recipient facsimile. You can enter up to 20 characters including numbers and
hyphenations (-), #, *.
PWD — Enter the password to retrieve a document from the mailbox in the recipient
facsimile. You can enter up to 20 characters including numbers and hyphenations (-), #,
*.
ECM — Enable or disable the ECM (Error Correction Mode). If enabled, it facilitates
error free communications by automatically resending any portion of the document
affected by phone line noise or distortion.
Line Select — Select the line to be used. If this is set to “Auto”, this equipment
automatically selects the line to be used. However, “Line 2” can be applicable only when
the 2nd Line for Fax Unit is installed.