Oki B 6100, Руководство по установке

Страница: 50 / 52

C-6 Ethernet Network Interface Card Configuration Guide
Protocol Commands
In the following table,
PROTO
is an abbreviation for the optional keyword
PROTOCOL
Protocol Commands
Command Option(s) Description
DEFINE PROTO
APPLETALK
option
{EN|DIS} Enables or Disables the AppleTalk protocol for
the Server.
ZONE newzone Places the Server in a zone other than the
default.
DEFINE PROTO IP
option
{EN|DIS} Enables or Disables the TCP/IP protocol for the
Server.
GATEWAY ipaddr Same as “DEFINE SERVER GATEWAY
ipaddress” on page C-3 .
IPADDRESS ipaddr Same as “DEFINE SERVER IPADDRESS
ipaddress” on page C-3 .
LOADHOST ipaddr Same as “DEFINE SERVER LOADHOST
ipaddress” on page C-3 .
NAMESERVER
ipaddr Specifies the IP address of the host that will
resolve text host names into their numeric
equivalents for TCP/IP connection attempts.
DEFINE PROTO
LAT
option
{EN|DIS} Enables or Disables the LAT protocol for the
Server.
DEFINE PROTO
NETWARE
option
{EN|DIS} Enables or Disables the NetWare (IPX)
protocol for the Server.
DSCONTEXT string Configures the NetWare Directory Services
context in which the Server is located. For more
information about NDS contexts, see your NDS
documentation.
DSLICENSE string Configures the NetWare Directory Services
license needed to enable NDS on your Server.
Enter the license string obtained from your
dealer
or Lantronix .
DSTREE string Configures the NetWare Directory Services tree
in which the Server is located. For more
information about NDS trees, see your NDS
documentation.
DEFINE PROTO
NETWARE
ENCAPSULATION
option {EN|DIS}
NATIVE Configures the Server to use the “native mode”
frame format.
ETHER_II Configures the Server to use Ethernet v2 frame
format.
802_2 Configures the Server to use 802.2 frame
format with NetWare SAPs.
SNAP Configures the Server to use 802.2 frame
format with SNAP SAPs.