Oki B 6100, Руководство по установке

Страница: 16 / 52

2-8 Ethernet Network Interface Card Configuration Guide
LAT Host Troubleshooting
By default, the LAT error message codes on the host are not translated into text error messages. If a LAT job
fails and appears in the queue with an eight-digit hex result code, the code can be translated by issuing the
following commands:
NetWare Configuration
The EZWebCon configuration software is the easiest way to configure the NIC. The following sections
cover other print configuration methods for NetWare hosts.
NOTE: The NIC needs an IP address before you can use EZWebCon. See the “Setting the IP Address” on
page 2-11 for instructions.
This chapter explains creating NDS print queues with NetWare Administrator and with the PCONSOLE
Quick Setup option. To create NDS print queues, you must be running NetWare version 4.x with NDS capa-
bilities.
If you are running NetWare versions 2.x, 3.x, or version 4.x with bindery emulation, you may configure bind-
ery print queues using QINST (bindery only) or PCONSOLE.
Configuring Your NIC
1. Define the directory service tree in which the NIC is located.
NOTE: For an explanation of the structure of the NetWare Directory Service tree, see your host
documentation.
2. Define the directory service context in which the NIC is located.
3. Enter the List Protocol NetWare Access command to ensure that at least one of the file servers in
the directory service tree is in the access list.
$SHOW QUEUE/FULL/ALL queue_name
(note the error code nnnnnnnn)
$SET MESSAGE SYS$MESSAGE:NETWRKMSG.EXE
$EXIT %Xnnnnnnnn
Area to check Explanation
The specified node name matches the
server’s node name Use the Show Server command.
The specified port name matches the port’s
name Use the List Port 1 command.
Local>> DEFINE PROTOCOL NETWARE DSTREE foodco
Local>> DEFINE PROTOCOL NETWARE DSCONTEXT ou=kiwi.ou=exotic.o=fruit