Oki B 6100, Руководство по установке

Страница: 15 / 52

Ethernet Network Interface Card Configuration Guide 2-7
NOTE: If no router is present on the network, the NIC will not accept AppleTalk print jobs for 60 seconds
after booting.
AppleTalk Host Troubleshooting
LAT Configuration
The EZWebCon configuration software is the easiest way to configure the NIC. The following sections
cover other print configuration methods for LAT hosts.
NOTE: The NIC needs an IP address before you can use EZWebCon. See “Setting the IP Address” on page
2-11.
LAT print queues can be created by printing to a port or printing to a service. Printing directly to a port
requires no NIC configuration.
NOTE: Printing directly to a port is the easiest method for printing to the NIC.
Printing Directly to a Port
1. Create a LAT application port that references the NIC port.
2. Create and start a print queue that uses the LAT application port.
3. Add the commands to the SYS$MANAGER:LAT$STARTUP.COM file so the required LAT devices
will be recreated after each host reboot.
NOTE: LAT terminal device characteristics may have to be changed to correctly print certain files. See
your VMS documentation for more information.
4. Print to the queue.
Area to Check Explanation
The printer is available to be
selected in the Chooser Make sure the printer is in the right zone.
$RUN SYS$SYSTEM:LATCP
LATCP> CREATE PORT LTAnnn/APPLICATION
LATCP> SET PORT LTAnnn/NODE=PRQ_xxxxxx/PORT=Port_n
LATCP> EXIT
$INITIALIZE/QUEUE/START/ON=LTAnnn:/PROCESSOR=LATSYM
/RETAIN=ERROR queue_name
$PRINT/QUEUE=queue_name filename.txt