Oki B 6100, Руководство по установке

Страница: 48 / 52

C-4 Ethernet Network Interface Card Configuration Guide
DEFINE SERVER SUBNET MASK ipmask Specifies the subnet mask to be used for the
Server. The
ipmask
must be in n.n.n.n
format.
HELP option <nothing> Displays a list of top-level (general) Help
topics.
<keyword> Displays information about the keyword(s)
entered. Multiple keywords must be specified
in the order they occur in a command.
DEFINE SERVICE
“
name
”
PORT num Creates a new service and associates it with
the specified port.
DEFINE SERVICE
“ name ” option
APPLETALK
{EN|DIS} Toggles whether the named service can be
used to service networks running the specified
protocol. RTEL applies to TCP/IP networks.
LAT {EN|DIS}
NETWARE {EN|DIS}
RTEL {EN|DIS}
DEFINE SERVICE
“
name
”
option
BANNER {EN|DIS} When Enabled, causes the Server to print a
banner page before jobs.
BINARY {EN|DIS} When Enabled, the Server will not process
data passed through the service. This
characteristic should be enabled when
printing PCL data.
EOJ string Causes the Server to send an end-of-job string
to the attached device after every job. Enter an
end string or the word
none .
FORMFEED
{EN|DIS} When Enabled, causes the Server to append a
formfeed to the end of LPR print jobs.
PSCONVERT
{EN|DIS} When Enabled, causes the Server to place a
PostScript wrapper around each job.
SOJ string Causes the Server to send a start-of-job string
to the attached device before every job. Enter
a start string or the word
none .
DEFINE SERVICE
“ name ” option
TCPPORT string Specifies a raw TCP listener socket for the
service. Enter a socket number (4000 to 4999)
or the word
none .
TELNETPORT string Specifies a TCP listener socket for the
service. Unlike TCPport, this option performs
Telnet IAC interpretation on the data stream.
Enter a socket number (4000 to 4999) or the
word
none .
Frequently-used Server Commands
Command Option(s) Description