Oilon VSi 6-14, Инструкция по установке и эксплуатации

Страница: 15 / 74

Accessory included in delivery VSi VMi
Outdoor temperature sensor X X
Adjustable feet (4 pcs.) X X
Brine circuit fill and bleed unit X
Flexible hoses for the brine circuit (2 pcs,
approx. 600 mm)
X X
Shut-off valve, 1" X
Filling bottle with shut-off valve X
Connecting pipe X
2.5 Removing transportation supports
During lifting, do not walk or work under the heat pump or any other
suspended load.
Two lengths of wood have been screwed onto the bottom of the unit to provide support
during transport.
1. Screw the adjustable feet (in the accessory
package) to the bottom of the heat pump.
2. Unscrew the fastening screws from the wooden
transportation supports.
3. Finish by lifting the heat pump off of the transportation supports with a pallet jack or
similar machine.
2.6 HVAC installation
When making HVAC connections, refer to the piping diagrams supplied with the unit.
More detailed instructions are provided in the following sections.
The heat pump’s circuit connections are located under the front panel, see the figures
below.
M8011 2204EN 13 (70)