Oilon GKP-50 MH, Руководство по эксплуатации и обслуживанию

Страница: 39 / 100

Fuel Typical atomizing pressure Oil hose connection
Light fuel oil
#2 fuel oil
20–25 bar
290–261 PSI
suction R ½”
return R ½”
To adjust pump pressure:
● Use the pressure adjustment screw.
● Turn the screw clockwise to increase the pressure.
● Install a pressure gauge/valve assembly, if necessary.
To vent the oil pump:
1. Loosen the plug of the pressure gauge port.
Do not remove the plug.
2. Let the burner operate for a while. Air bubbles come out of the hole.
3. When no more bubbles come out, retighten the plug carefully.
If the atomizing pressure during capacity change from max. to min.
exceeds 2 bar / 29 PSI the pump must be replaced.
The pump is self-priming. The pump is intended for use in two-pipe
system.
Oil pump AJ
A203S ver. 2
Pos. Item Pos. Item
1 Suction line connection 6 Air venting plug
2 Return line connection 7 Bypass plug
3 Nozzle connection 8 Vacuum meter connection
4 Pressure gauge connection 9 Filter
5 Pressure regulation
M5164 1640EN 37 (95)