Oilon CUBE 10 EasyAce, Руководство по установке и пусконаладке

Страница: 56 / 58

COMMISSION REGULATION
COMMISSION REGULATION (EU)
No 813/2013 ANNEX II TABLE 2
On standby P
SB
kW 0.01 0.01 0.01 0.01 0.01 0.01
In crankcase heating mode P
CK
kW 0.00 0.00 0.00 0.00 0.00 0.00
SUPPLEMENTARY HEATER
Rated heat output kW - - - - - -
Type of energy input - - - - - - -
OTHER ITEMS
Capacity control - ✓ ✓ ✓ ✓ ✓ ✓
Sound power level L
WA
dB(A) ECO:
40
CUBE:
40
ECO:
44
CUBE:
44
ECO:
45
CUBE:
45
ECO:
47
CUBE:
47
ECO:
48
ECO:
46
Brine volume flow rate (brine 0/−3 °C, brine
solution: water–ethanol 30 m-%, water +47/
+55 °C)
m3/h 1.0 1.3 1.8 2.3 3.1 3.9
WATER HEATER
Declared load profile - CUBE:
L
CUBE:
L
CUBE:
L
CUBE:
L
- -
Daily electricity consumption Q
elec
kWh/d CUBE:
7.142
CUBE:
6.935
CUBE:
6.645
CUBE:
6.691
- -
Energy efficiency, DHW heating
wh
- CUBE:
107
CUBE:
110
CUBE:
115
CUBE:
114
- -
NAME AND ADDRESS OF THE
MANUFACTURER
Suomen Lämpöpumpputekniikka Oy,
Unikontie 2, FI-62100 Lapua, Finland
1) Specific precautions that shall be taken when the space heater is assembled,
installed or maintained:
Pay attention to safety when tilting, lifting, carrying, or moving the unit.
Always pay attention to electrical safety when working with or near electrical
components. Always switch off electricity using the main switch and ensure that there
is no voltage present before doing any electrical work.
Pay attention to safety when handling refrigerant and compressor oil. Exposure to the
high voltage, refrigerant or refrigeration oil in the unit can cause a serious injury.
The weight of the unit presents a crush hazard.
Disassembly, recycling and/or disposal at end-of-life:
Recover the refrigerant and the compressor oil, transfer for recycling or disposal as
required by applicable laws, rules and regulations. The other components should also
be recycled and disposed of in compliance with applicable laws, rules and regulations.
The values presented in this document are rounded to the nearest integer in
accordance with the regulation.
The values in the table apply only when calculation rules and assumptions specified
in the ecodesign and energy labelling regulation are applied. The values for the actual
building may differ considerably from those presented here.
54 (54) M8006 2123EN