Oilon CUBE 10 EasyAce, Руководство по установке и пусконаладке

Страница: 30 / 58

Connections for control valve actuator, 0–10 V
Accessory Heating circuit control valve actuator, 0–10 V 24 V
Designation 36962220
Description Esbe ARA639 12520100 (12520117 OEM), 0–10 V, 4–20 mA, 24 V AC/DC, 3 wires,
15/30/60/120 s 90°, pre-set to 60 s (DIP switch 2 ON), pre-set to OPEN (with
increasing signal) counterclockwise CCW (DIP switch 6 ON)
Valve 34034065, 34034067, 34034068, 34034467
When making connections, pay attention to the valve's control direction. To invert
the valve’s control direction, either change the position of DIP switch 6 or invert the
direction from settings.
Inverted control disabled, DIP switch 6 ON
Signal Control direction Rotation direction
Increases Open (more heat) Counterclockwise (CCW)
Decreases Closed (less heat) Clockwise (CW)
0 V closed,
10 V open
Inverted setting enabled, DIP switch 6 ON
Signal Control direction Rotation direction
Increases Closed (less heat) Counterclockwise (CCW)
Decreases Open (more heat) Clockwise (CW)
0 V open, 10
V closed
Inverted control disabled, DIP switch 6 OFF
Signal Control direction Rotation direction
Increases Open (more heat) Clockwise (CW)
Decreases Closed (less heat) Counterclockwise (CCW)
0 V closed,
10 V open
Inverted control enabled, DIP switch 6 OFF
Signal Control direction Rotation direction
Increases Closed (less heat) Clockwise (CW)
Decreases Open (more heat) Counterclockwise (CCW)
0 V open, 10
V closed
3.6 Heating circuit pump
The connections for the heating circuit pump are indicated in the unit’s electric diagram.
The location of the pump is indicated in the piping diagram.
Enable the pump from Initial setup settings (see chapter Commissioning ) or from
Heating
settings (see the table below). If valve control is enabled, the pump will also
be enabled automatically.
28 (54) M8006 2123EN