- 14 -
5 - 7. Timer Adjustment
The machine is equipped with a screw sensor that detects the number of screws on the rail.
If a screw accumulates to some extent on a rail, operation of a scooping block will stop and vibration will stop after
timer set time.
The timer should normally be set to “Min.”
However if screws are moving slowly, it may be necessary to set the timer to “Max.”
● Adjust the Timer control dial on the back of the machine using a precision screwdriver. (See Picture 16)
● Turn the dial clockwise to reduce the vibration time. Turn it counterclockwise to increase the vibration time.
● During control dial adjustment, do not force the screwdriver beyond its rotation limits.
● Set the timer after checking that the rail is filled and that the screws are properly aligned.
● Use the provided screwdriver for adjusting the timer.
Picture 16
