- 18 -
6 - 2. Operation Check
● If each part is adjusted appropriately, screws are sent to the stopper.
● Pick up screws from the stopper using the electric screwdriver. Using the bit guide as a guide, pull the screwdriver
downward. Fit the screwdriver bit into the cross slot of the screw and then pull the screwdriver toward you in a hori-
zontal direction to pick up the screw. (See Picture 3)
● Do not use force when fitting the screwdriver bit to the screw head. This may bend the rail or lead to malfunction of the
machine.
● To fit the bit securely into the cross slot of the screw, slightly rotate the screwdriver bit.
● Select the screwdriver bit according to the nominal diameter of the screws you are using. (Refer to “4-1. Model Type.”)
● If screw alignment or flow is abnormal, check and adjust each part. (Refer to “4-1. Model Type”)
● Pull the screwdriver downward and fit the
screwdriver bit into the cross slot of the screw.
● Pull the screwdriver toward you in a horizontal
direction to pick up the screw.
Picture 3
