- 10 -
5 - 4. Height Adjustment of Passing and Holding Plates
● Both the passing and holding plates are fixed to the rail. (See Picture 8)
● Place a screw between the passing plate and the rail grove and adjust the height of the passing plate by loosening the
passing plate fixing screw. (See Picture 9) If the gap between the passing plate and the rail groove is too wide, the
screw flow may stop. If the gap is too small, the screw flow may also stop. (Screws cannot pass through the gap.) Ad-
just the height to the exact height of the screw head.
● Optional passing plates for various screw types, including thin head screws, are available. Contact the dealer from
which you purchased the machine with details of the screw size you are planning to use.
Holding plate
Passing
plate
Holding plate
fixing screw
Passing plate
fixing screw
Picture 8
Passing
plate
Screw
Picture 9
