- 23 -
1. The machine does not run after
being turned on.
Problem
Cause of Problem
Troubleshooting
○ The power is cut off.
○ No screw was picked up from the screw
holding groove for a given period of
time.
○ There are too many screws in the scoop-
ing chamber.
○ An object is stuck inside the machine.
○ AC adapter failure
○ Check that the AC adapter is properly
connected to the power source.
○ Pick up the screw in the screw hold-
ing groove.
○ Adjust the Timer control dial.
○ Reduce the number of screws in the
scooping chamber.
○ Remove the object.
2. The rail does not move back
and forth.
○ An object (e.g. screw) is stuck between
the rail and the body.
○ Even though there is no object stuck be-
tween the rail and the body, it does not
vibrate.
○ Remove the object.
○ Check and adjust the amplitude. If
the rail does not vibrate after the
adjustment, contact the dealer from
which you purchased the machine
for repair.
9. Troubleshooting
Be sure to turn off the machine before checking the problems listed below.
