57
PAS 2200
EN
GENERAL WARNINGS
☞
The installation must be carried out following the manufacturer instructions. A
wrong installation could cause damages to people, animals or things, for which
the manufacturer cannot be considered liable.
• To avoid dangerous overheatings, to straighten the whole power cord and to use the appliance
as advised in the “USE” paragraph is recommended.
• Do not leave the appliance unnecessarily inserted.
Disconnect the plug from the mains power supply when the appliance is not used.
• Do not obstruct the ventilation and heat elimination openings or fissures.
• If the power cord of this appliance is damaged, it must be changed exclusively by a technical
assistance centre authorized by the manufacturer, since special tools are necessary.
This appliance electrical safety is ensured only when the appliance itself is
correctly connected to an efficient grounding system as required by the current
electrical safety standards.
• It is necessary to check this fundamental safety condition and, in case of doubts, ask for an
accurate system check from professionally qualified personnel.
The manufacturer cannot be considered liable for possible damages caused by the lack of
grounding of the system.
• Before carrying out any operation turn off the appliance and disconnect the power plug from
the outlet.
• Don’t connect the appliance to the power supply through external timers or remote control
systems.
Make sure that the power cord doesn’t protrude from the bearing plane in order
to prevent someone from, even inadvertently, pulling it toppling the appliance.
☞
Place the appliance on an horizontal and very stable bearing plane, whose
surface is not delicate (ex. lacquered furniture, tablecloths etc.). Make sure that
the appliance is safely supported.
