Effective 11/2010
34
Control Screen
The
CONTROL
screen is used to operate the machine. The mode of operation –
AUTOMATIC
or
MANUAL
is selected here and the system status can also be
viewed here.
Power
In
AUTOMATIC
mode, the machine will start running when the button is in the
ON
position. In
MANUAL
mode, this button must be in the
ON
position and
also requires the additional
START
button to be pressed. When pressed again,
this button will stop the machine regardless of the mode of operation.
Operating Mode
This feature allows the selection of either
MANUAL
or
AUTOMATIC
modes. The
AUTOMATIC
mode will initiate machine operation when the
ON/OFF
button is in the
ON
position and all other conditions are satisfied.
The
MANUAL
mode requires an additional
START
button to be pressed
and is intended to prevent inadvertent machine operation.
Manual Start
This feature is used in conjunction with the
MANUAL
mode of operation, and
must be pressed each time the system is started.
System Status
This feature monitors the current status of the system. It will display
STANDBY
when the system is deactivated and
CYCLING
when the system is activated.
Содержание MOGS - 100
