Effective 11/2010
5
Safety Guidelines
Handling of Compressed Gas Cylinders
Many of the following procedures for the handling, storage, and utilization of
compressed gas in cylinders are taken from material furnished by the Compressed
Gas Association, which complies with
OSHA
standards.
Always ensure that compressed gas cylinders are securely strapped or chained in place to
prevent tipping or falling. Do not store near elevators, stairs, or passageways.
Do not place cylinders in a position where they might become part of an electric circuit.
When electric welding is taking place, precautions should be taken to prevent accidental
grounding of cylinders, permitting them to be burned by electric welding arc.
If visual inspection indicates obvious damage, the cylinder should be returned to the
supplier without any attempt at using the machine.
If cylinder leaks, other than normal venting, and the leak cannot be corrected by tightening a
valve gland or packing nut, the valve should be closed and a tag attached stating that the
cylinder is not serviceable. Remove the cylinder outdoors to a well-ventilated or open area,
notify the supplier, and follow the supplier's instructions for the return of the cylinder.
Keep the cylinder valve closed at all times except when in active use. When removable caps
are provided for valve protection, they should not be removed except for active use.
Remember to replace removable caps when not in use.
Cylinders should not be dropped or permitted to strike each other or any other surface.
Do not drag or slide cylinders; use a suitable hand truck, fork truck, roll platform or similar
device, firmly securing the cylinders for transporting.
Do not store oxygen cylinders with flammable gas cylinders. Stored oxygen and fuel gas
cylinders should be at least
20 ft
apart; preferably separated by a fire resistant partition.
For additional information refer to the CGA publications that can be found at
See also ISO publication 10083 that can be found online at
http://www. iso.org
Содержание MOGS - 100
