OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
9
Setup
1. Flip both switches on the control panel (“Motor” and “Heat”) to the “Off”
position (down).
2. Connect the power cord to the proper voltage source. If an adapter or
another power plug is required, note that the green wire is the ground
and the white and black wires are the power leads.
3. When the power cord is connected, the timer will be activated. It is rec-
ommended that the power be left connected even when tests are not
being conducted so the timer will continue to keep time.
Control Panel
Temperature Controller
Timer
