OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
12
Timer
The timer can be programmed to turn the heaters on and off throughout the
week. Each set of on/off operations requires setting an ON time and an
OFF time separately. During programming, the following symbol will appear
on the display.
When programming the ON time, the up arrow will blink. When programming
the OFF time, the down arrow will blink.
To Set to the Correct Time:
1. Turn the “Heat” switch on the control panel to the ON position.
2. Set the “Out 1 switch - On-Auto-Off” to the AUTO (middle) position
3. Set the “P1, P2, Run” button to P1 to activate programming mode for
Output 1.
4. Open the panel door and press and hold the “TIME ADJ” button until a
blinking clock appears.
5. Press the “h” and “min” buttons to set the correct local time.
6. Press “WRITE” when finished.
7. Set the “P1, P2, Run” button to P1 to show the time.
Panel Door
Folds Down
