OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
15
Maintenance
1. Every 90 days, put a small amount of grease on the chain and sprockets.
2. Do not lubricate the Teflon
®
roller bearings.
3. Your OFITE Roller Oven has been preset at the factory to operate at
either 115V (172-00 / 173-00) or 230V (172-00-1 / 173-00-1). However,
this product is designed to be easily converted from 115V to 230V or from
230V to 115V. To accomplish this:
Disconnect the unit from the power source before opening the
unit casing.
a. Remove the top panel.
b. Remove the existing plug receptacle and replace it with the new one.
For 115V, use part #165-47. For 230V, use part #164-30.
c. Locate the two voltage conversion switches on the circuit board (refer
to the photo below). Switch both of these switches to the appropri-
ate voltage (switch them both to the right for 115V and to the left for
230V).
d. Re-install the top panel.
Speed Control
Knob
Voltage
Conversion
Switch
Voltage
Conversion
Switch
