140
Inverter zwembad warmtepomp
NL
Stap 1: Verwijder de regeleenheid van het apparaat. Let op de communicatiekabel die op
de printplaat is aangesloten en maak deze voorzichtig los.
Stap 2: Gebruik een schroevendraaier om de behuizing te openen en verwijder de
regeleenheid.
Stap 3: Boor twee gaten parallel aan elkaar op ooghoogte: centerafstand 60 mm.
Stap 4: Bevestig de achterkant van de regeleenheid aan de muur.
Stap 5: Lijn de voor- en achterkant uit en zorg ervoor dat de behuizing stevig
aan de muur is bevestigd.
Stap 6: Sluit de communicatiekabel voorzichtig aan.
Stap 1
Stap 3
Stap 5
Stap 2
Stap 4
Stap 6
Wandmontage der
Bedieneinheit
3.9
BELANGRIJKE OPMERKING:
Gebruik geen scherpe voorwerpen bij het aanraken van de voorkant en knoppen
op de regeleenheid, deze kunnen deze beschadigen. Wanneer de regeleenheid aan
de muur is bevestigd, mag u niet aan de communicatiekabel trekken.
Dit kan de bedrading losmaken en het contact beschadigen.
16
3.9 Wall-mounting the remote control
Step 1:
Detach the remote control from the machine. Pay attention to the communication wire connected to the
printed circuit board and separate them carefully.
Step 2:
Use a screwdriver to open the casing and separate the remote control.
Step 3:
Drill two parallel holes at eye level: 60 mm centre-to-centre.
Step 4:
Attach the remote control’s rear cover to the wall.
Step 5:
Align the front and rear covers exactly, ensuring that the box is fixed firmly to the wall.
Step 6:
Carefully connect the communication wire.
WARNING: Do not use sharp objects to touch the remote control’s front face and buttons as you
may damage it. When the remote control is fixed to the wall, do not pull the communication wire,
this may cause a loose contact.
16
3.9 Wall-mounting the remote control
Step 1:
Detach the remote control from the machine. Pay attention to the communication wire connected to the
printed circuit board and separate them carefully.
Step 2:
Use a screwdriver to open the casing and separate the remote control.
Step 3:
Drill two parallel holes at eye level: 60 mm centre-to-centre.
Step 4:
Attach the remote control’s rear cover to the wall.
Step 5:
Align the front and rear covers exactly, ensuring that the box is fixed firmly to the wall.
Step 6:
Carefully connect the communication wire.
WARNING: Do not use sharp objects to touch the remote control’s front face and buttons as you
may damage it. When the remote control is fixed to the wall, do not pull the communication wire,
this may cause a loose contact.
16
3.9 Wall-mounting the remote control
Step 1:
Detach the remote control from the machine. Pay attention to the communication wire connected to the
printed circuit board and separate them carefully.
Step 2:
Use a screwdriver to open the casing and separate the remote control.
Step 3:
Drill two parallel holes at eye level: 60 mm centre-to-centre.
Step 4:
Attach the remote control’s rear cover to the wall.
Step 5:
Align the front and rear covers exactly, ensuring that the box is fixed firmly to the wall.
Step 6:
Carefully connect the communication wire.
WARNING: Do not use sharp objects to touch the remote control’s front face and buttons as you
may damage it. When the remote control is fixed to the wall, do not pull the communication wire,
this may cause a loose contact.
16
3.9 Wall-mounting the remote control
Step 1:
Detach the remote control from the machine. Pay attention to the communication wire connected to the
printed circuit board and separate them carefully.
Step 2:
Use a screwdriver to open the casing and separate the remote control.
Step 3:
Drill two parallel holes at eye level: 60 mm centre-to-centre.
Step 4:
Attach the remote control’s rear cover to the wall.
Step 5:
Align the front and rear covers exactly, ensuring that the box is fixed firmly to the wall.
Step 6:
Carefully connect the communication wire.
WARNING: Do not use sharp objects to touch the remote control’s front face and buttons as you
may damage it. When the remote control is fixed to the wall, do not pull the communication wire,
this may cause a loose contact.
16
3.9 Wall-mounting the remote control
Step 1:
Detach the remote control from the machine. Pay attention to the communication wire connected to the
printed circuit board and separate them carefully.
Step 2:
Use a screwdriver to open the casing and separate the remote control.
Step 3:
Drill two parallel holes at eye level: 60 mm centre-to-centre.
Step 4:
Attach the remote control’s rear cover to the wall.
Step 5:
Align the front and rear covers exactly, ensuring that the box is fixed firmly to the wall.
Step 6:
Carefully connect the communication wire.
WARNING: Do not use sharp objects to touch the remote control’s front face and buttons as you
may damage it. When the remote control is fixed to the wall, do not pull the communication wire,
this may cause a loose contact.
16
3.9 Wall-mounting the remote control
Step 1:
Detach the remote control from the machine. Pay attention to the communication wire connected to the
printed circuit board and separate them carefully.
Step 2:
Use a screwdriver to open the casing and separate the remote control.
Step 3:
Drill two parallel holes at eye level: 60 mm centre-to-centre.
Step 4:
Attach the remote control’s rear cover to the wall.
Step 5:
Align the front and rear covers exactly, ensuring that the box is fixed firmly to the wall.
Step 6:
Carefully connect the communication wire.
WARNING: Do not use sharp objects to touch the remote control’s front face and buttons as you
may damage it. When the remote control is fixed to the wall, do not pull the communication wire,
this may cause a loose contact.
