110
Pompe à chaleur pour piscine à onduleur
FR
Interroger les paramètres
du système
4.13
ATTENTION : Ce processus sert à faciliter les futurs travaux d'entretien
et de réparation. Les réglages par défaut ne doivent être modifi és que par
un spécialiste expérimenté.
ATTENTION : Toute modifi cation des paramètres
défi nis invalidera automatiquement la garantie.
Les paramètres du système peuvent être vérifi és et réglés à l'aide de la télécommande.
Pour ce faire, suivez les étapes ci-dessous :
Étape 1: Appuyez sur la touche pendant 3 secondes jusqu'à ce que
vous entriez dans le mode pour confi rmer les paramètres.
Étape 2: Appuyez autant de fois que nécessaires sur les touches ou jusqu'à ce
que le paramètre à modifi er soit affi ché.
Étape 3: Appuyez sur la touche
, pour démarrer la confi guration des
paramètres de réglage. La valeur se met à clignoter.
Étape 4: Appuyez sur les touches ou , pour régler la valeur.
Étape 5: Appuyez sur la touche
, pour confi rmer la nouvelle valeur.
Étape 6: Appuyez sur la touche
, pour revenir à la fenêtre principale.
Si la télécommande n'est pas utilisée pendant 60 secondes, elle s'éteint automatiquement.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
Étape 1
Étape 4
Étape 3
Étape 6
Étape 2
Étape 5
"clignote"
