OCULUS Corvis ST, Инструкция по эксплуатации, Страница: 37 / 86

12 Perform a Mea s urement
Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01) 31 / 80
12 Perform a Mea s urement
Perform a measurement for each eye before you save the data. To perform
a measurement, you must

Start the Corvis® ST program at the computer, sec. 12.1, page 31

Adjust the Corvis® ST, sec. 12.2, page 32

Start the measurement, sec. 12.3, page 37

Perform a second measurement, sec. 14.3, page 52

Save the data, sec. 12.5, page 38

Complete the measurement, sec. 12.6, page 39
You can use the patient data management, sec. 12.7, page 40
12.1 Start the Corvi s ® ST Program at the Computer

Select a patient´s name.

Press the [Corvis® ST] button to start the Corvis® ST program.
Condition: Autostart must be activated in the Corvis® ST software set-
tings. See
User Guide .
Abb. 12-1: Start Corvis® ST program