OCULUS Corvis ST, Инструкция по эксплуатации, Страница: 44 / 86

12 Perform a Mea s urement
38 / 80 Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01)
12.5 Saving data
Depending on the installation, your data is transferred to a computer or
laptop. You can use the patient data management for your data,
sec. 14,
page 48 .
Note
Loss of data due to interrupted save
If you turn off the Corvis® ST while the progress bar is still displayed, data
will be lost.

Do not turn off the power until saving is completed, e.g. when the
progress bar is complete.
☞
If you have entered the patient data at the Corvis® ST unit itself, the
measurement is not automatically saved to a file. You can use a USB stick
for this purpose,
sec. 14.5.2, page 53 .
You can set the data transfer speed from the Corvis® ST to the computer/
laptop in the device settings
(see User Guide) .