Ocular Robotics RobotEye REV25-ST, Руководство пользователя

Страница: 7 / 27

Basics 4
www.ocularrobotics.com Ocular Robotics Ltd
2.2 What You Need
In order to operate the REV25-ST VISION - STABILIZED unit and system, you will need:
1. Power supply – A 24 volt DC 10 Amp power supply with a continuous current
capacity of 10 Amps.
2. A suitable C-mount camera – Ocular Robotics can supply and mount a range of Allied
Vision Technologies GigE cameras.
3. Ethernet cable – A standard Ethernet cable (Cat5e or Cat6) is needed for control and
communication with the REV25-ST system.
4. Camera communications cable – All cameras supplied by Ocular Robotics have a
GigE communications interface.
5. A computer with a Windows or Linux operating system with one free 100 Megabit
Ethernet port.
2.3 Handling and Transportation
Avoid handling the RobotEye using the scanning head. This may result in mechanical
damage and misalignment of the sensor.
When transporting, make sure the RobotEye head will not be subject to large external
loads and stresses.
Figure 2.3 – REV25-ST Handling Zones