12
www.ocularrobotics.com
Ocular Robotics Ltd
2.7
Cleaning and Maintenance
CAUTION
– Power must be disconnected from the REV25-ST
system before any cleaning or maintenance is carried out.
User performable cleaning and maintenance of the RobotEye REV25-ST VISION -
STABILIZED System is limited to cleaning of the exterior housing and the aperture
window. For ANY other maintenance or repair the unit should be returned to the
factory. Unauthorised opening of the system enclosure will void warranty. Use the
following guidelines for cleaning of the system enclosure and aperture window.
It is
VERY
important not to abrade or scratch the system window during cleaning or
at any other time as it has the potential to significantly degrade system performance.
Use a soft non-abrasive cloth to clean the window, make sure there are no foreign
abrasive particles on the window before performing cleaning, as this may damage
the window.
DO NOT
use solvents. If a cloth alone is not sufficient, water or Isopropyl Alcohol
may be used.
The rest of the REV25-ST VISION - STABILIZED System housing can be cleaned with
a soft damp cloth.
2.7.1
Replacement Parts
Replacement parts can be ordered directly through Ocular Robotics.
1)
RobotEye REV25-ST System power cable.
2)
IP68/IP69K Data cable (REV25-ST System).
a)
An optional 5m or 10m IP68 Cable can be purchased from Ocular Robotics
3)
5mmx20mm 16A Slow Blow Fuse.
a)
The fuse is located in the Fuseholder located above the left Ethernet connector.
