Adesys bv, Wateringen, NL
Installation instructions
Octalarm-T2 / T4 / T8 / T16
39
Use this option to set the delay in minutes (from 0 to 99 min). The alarm will not be sent
until the set time has passed.
MSN number:
Use this option to set the MSN number (Multiple Subscriber Number) at which the
Octalarm has to be available on the S box (without prefix). If no number is entered, the
Octalarm will respond to every incoming call. The following question shows next:
CLIP number:
Use this option to set the number (without prefix) with which the Octalarm should identify
itself to the call receiver (CLIP, or Caller Line Identification Presentation function). In most
cases, this can be the MSN number. If no number is entered, the Octalarm will identify
itself with the main ISDN number.
Auto answer: on / off
Use this option to allow remote access to the alarm status:
•
OFF
the Octalarm will not answer calls to the machine,
•
ON the
Octalarm will answer after a set number of call signals (see below) and
will pass on the status of the alarm channels, using tone code or speech (model
-S).
In case the selected option is
off
and a telephone report is being acknowledged by a call back
(only if this is set with the relevant telephone number), the Octalarm answers after 2 rings.
In case the selected option is
on,
retrieving the alarm status is always possible, even when the
telephone dialler key is switched off.
ANSWER AFTER: 05 CALL SIGNALS
Use this option to set the number of call signals (1 to 19) that the Octalarm should wait
before answering to send on the alarm status.
Make sure that the MSN number is entered correctly, without prefix. If the MSN number is not
correct, the Octalarm will not answer. If no MSN number has been entered, the Octalarm will
respond to every incoming call after the set number of call signals.
Telephone line test: on / off
The default setting for telephone line testing is on. If the telephone connection is lost, the
warning light and the buzzer will come on. You can turn this setting off if the telephone line
test alarm regularly comes on if another telephone connected to the same line is used.
(Combinations of the Octalarm with some home or professional switchboards and some
telephones may cause problems.)
