Adesys bv, Wateringen, NL
Operation instructions
Octalarm-T2 / T4 / T8 / T16
23
13. TESTING
The test key enables you to test most options of the Octalarm in a quick and convenient way. It also
enables you to find possible set-up errors.
13.1 Optic and acoustic alarms test
Press the test key. All indicators will illuminate and the built-in buzzer and the external signal devices
will be activated. On the display appears:
-OCTALARM-TEST-
, followed by the type number OT2, OT4,
OT8 or OT16, possible followed by:
•
-S: model with voice messages instead of tone code messages,
•
-I : model adjusted for the ISDN network,
•
-G: model for the mobile GSM network,
•
or a combination of the above.
The test can be interrupted using the reset key. After 5 seconds, the test will be interrupted
automatically.
13.2 Telephone report test
Press the test key followed, within 5 seconds, by the selection key of the alarm channel to be tested.
The set report procedure for the relevant channel will be passed through completely. With the model
for analogue or ISDN connections, the built-in speaker produces all signals on the telephone line,
making it possible to trace possible set-up errors of telephone numbers, reporting procedures and
such. It is not possible to listen in on conversations with the GSM model.
14. SWITCH OFF COMPLETELY
The Octalarm does not dispose of an on/off switch on the operating panel. The following has to be
done to completely turn off the device:
B
Disconnect the plug from the power socket,
B
Keep the reset key on the operation panel or the reset key underneath the connection cover
depressed until the display and all the indicators have been turned off.
Connecting the plug to the power socket will automatically turn on the Octalarm.
