Adesys bv, Wateringen, NL
Operation instructions
Octalarm-T2 / T4 / T8 / T16
13
chapter 18.6 Prog 41 “set dialler”
6.4 Reset key
Press this key to disable the buzzer and to interrupt the telephone report.
6.5 Test key
This key allows you to test the main alarm functions in a quick and convenient way. See part 13
“TESTING" for the test options.
6.6 Buzzer key
The key to switch on/off the built-in buzzer and the signallers that may be connected externally. The
indicator in the key lights up in case the buzzer is switched on. To avoid the buzzer being disabled
accidentally (e.g. while cleaning), the key has to be kept depressed when turning off.
6.7 Telephone dialler key
Key for switching on/off the telephone report. The LED inside the key lights up in case the telephone
dialler is switched on. To avoid switching off the telephone report accidentally (e.g. while cleaning), the
key has to be kept depressed when turning off.
In case the telephone dialler is switched off (LED off), an alarm will not be reported by telephone.
Calling
up the Octalarm in order to receive the alarm status by telephone will, however remain
possible.
6.8 Display and cursor keys
The display is used for:
•
the menu-driven setting of telephone numbers by the user
•
the menu-driven programming of installation data by the installer
•
showing the progress status of a telephone report
•
showing possible alarms or device malfunctions.
The cursor on the display blinks whenever a value can be entered or an option can be chosen during
the set-up. Use the cursor keys
C
and
D
to move the cursor around and the keys
E
and
F
to modify the
value or the option at the cursor's position. Every new setting has to be confirmed using the Prog-key.
