1
English
POWER UNIT DP-10
READ THIS FIRST
General Production
The production is a high-speed, fast-cutting power tool, not a
toy. For your own safety and the safety of others, read and be
sure you understand all of the safety precautions contained in
this Owner’s Manual before operating the production. Retain
the Owner’s Manual, and make it available to all persons who
will be using the production. Periodically, review the manual to
refresh your understanding of the safety instructions contained
in it.
●
Careless or improper use can cause serious or fatal
injury.
Observe the safety instructions contained in this manual as
well as all applicable governmental and workplace safety
standards, regulations and ordinances. Your authorized
equipment dealer can show you how to operate your
production properly.
●
The rotating production can hurl objects, causing injury.
Keep bystanders, children and animals at least 15 m away
while the production is running. Never use a production in
areas where the blade may strike a hard foreign object, such
as stone. Striking a hard object can damage the production,
and may crack, chip or even break off cutting blade. Flying
blade pieces can cause severe or fatal injury.
●
Do not allow children to operate the production.
Operators must have sufficient size, strength and maturity
to be able to lift and operate the production correctly for
extended periods of use. They must also be able to read,
understand and follow the safety instructions in this manual.
●
Exhaust fumes contain poisonous carbon monoxide gas.
Operate your production only outdoors in a well-ventilated
area. Stop the engine immediately if exhaust fumes cause
you to experience symptoms of headache or nausea.
●
Gasoline is highly flammable and can be explosive under
certain conditions.
Before refueling, stop the engine and allow it to cool. Do not
smoke. Make sure refueling area is well ventilated and free
from any source of flame or sparks, including appliances with
a pilot light. Wipe up fuel spills immediately. Check for and
repair any fuel leaks before starting the production.
Operator
●
Avoid serious or fatal injury.
Never operate the production under the influence of drugs or
alcohol. Do not use the production if you are sick or taking
medication that causes drowsiness. If you get tired while
using the production, take a break.
●
Always wear appropriate protective gear to avoid injury.
Eye protection in the form of goggles or properly fitted safety
glasses must be worn. Hearing protection, such as earplugs,
should also be used. Have your hearing checked regularly.
Protect your hands and feet by always wearing non-slip
gloves and heavy-duty boots when operating and handling
the production. Do not wear short pants, sandals, or go
barefoot.
Wear a hard hat to reduce the risk of injury to your head when
there is a danger of head injuries.
●
Loose clothing or scarves can lead to injury.
Long hair and loose articles of clothing such as scarves,
necklace jewelry, and so forth can become caught in nearby
brush or in rotating parts of the production itself. Always wear
sturdy close-fitting long-sleeve shirts and long pants that still
allow freedom of movement. Secure hair so that it is above
shoulder level.
●
Maintain your balance to avoid loss of control and injury.
Before and operating, inspect the area for loose and uneven
ground, holes or ditches, tree branches or stumps, and
other such objects on or above the ground that could cause
stumbling. The production must be operated stably on the
ground and with the operator maintaining footing and balance
at all times. Keep the production, and any part of your body
away from fences, the side of buildings, tree trunks, stones
or other such objects which can cause improper footing or
balance. Keep both hands on the production and do not
overreach. Never attempt to cut with one hand.
●
Always be aware of your surroundings and stay alert for
possible hazards that you may not hear due to the noise
of the production.
●
Gasoline is highly flammable and can burn or irritate
skin.
Change clothing immediately if fuel is spilled on it. Never
remove the fuel cap while the engine is running.
●
Be alert for signs of repetitive stress injury.
Using the production or any vibrating machinery over a period
of time may cause numbness, burning sensations, or other
indications of injury. If you experience any such symptoms, do
not operate the production and consult your doctor.
●
Disconnect spark plug wire before you work on the unit
or leave it unattended.
●
Always keep both hands or control handles. DO NOT
operate one-handed. DO NOT hold material you are
cutting.
●
The muffler side of the engine should be away from your
body. This is necessary to avoid arm burns.
English
Содержание DP-10
Страница 2: ......
