OCHIAI DP-10, Руководство пользователя

Страница: 21 / 24

19 English
3. Pruner CP-10
READ THIS FIRST
DANGER
All overhead electrical conductors and communications
wires can have electricity flow with high voltages.
Never touch wires directly or indirectly when trimming,
otherwise serious injury or death may result.
CAUTION
Review the area to be
trimmed. Look for hazards
that could contribute to
unsafe conditions.
DO NOT operate unit if any
wires (power, telephone,
cable, etc.) are closer than
15 m to any part of the
operator or unit.
Spectator and fellow workers must be warned, and
children and animals prevented from coming nearer than
15 m while the pole trimmer is in use.
Avoid all power lines. This unit is not insulated against
electrical current.
Always wear head protection with full face shield do help
protect against falling branches and debris.
●
Confirm the chain oil every
10 minutes.
Lubricate the chain oil if you
need.
●
Automatic oiling.
At first oiling quantity are
decided by vendor.
And you can adjust the oiling
quantity.
1. First loosen the screw (B) only
one rotation.
2. Turn the oil pump adjuster
screw (C) clockwise, oiling
quantity will be large.
And you turn it
counterclockwise, oiling
quantity will be little.
3. Tighten the screw (B) when
you finish to adjust the oiling
quantity.
15m
1
2
3
B
A
C
A. Oil Tank Cap
B. Chain oil pump lock screw
C. Chain oil pump adjust
screw
SPECIFICATION
Model Pruner CP-10
Overall dimensions Length × Width × Height mm 1,475×81×113
Weight Kg 1.7
Drive shaft assembly &
Gear case assembly
Bearing of shaft Nylon liner
Lubrication High quality lithium grease
Drive shaft dia. mm ø 7
Drive shaft material High tensile steel
Drive shaft type Flexible cable
Chain oil SAE 30
Direction of rotation Counterclockwise
Blade 254 mm (90SG-40E)
Vibration measurement according to EN ISO 11680 (EN ISO 22867), EN 12096: handle
With extension Without extension
Front handle
ahv, eq 5.5 m/s
2
(Uncertainty, K: 0.5 m/s
2
)
ahv, eq 6.4 m/s
2
(Uncertainty, K: 0.3 m/s
2
)
Rear handle
ahv, eq 6.4 m/s
2
(Uncertainty, K: 0.2 m/s
2
)
ahv, eq 9.7 m/s
2
(Uncertainty, K: 0.2 m/s
2
)
Sound measurement according to EN ISO 11680-1 (EN ISO 22868) ISO 4871
Measured A-weighted sound power level LWAd: 104 dB
Measured A-weighted emission sound pressure level,
L
pA
at the operator’s position
L
pAeq
: 92 dB (Uncertainty, K: 2 dB)
CAUTION
Information that the machine cannot be use in the potentially explosive ambient.