OCHIAI DP-10, Руководство пользователя

Страница: 20 / 24

18 English
OPERATING INSTRUCTIONS
●
Adjust the handle to a comfortable position and maintain good
balance as recommended in this manual.
●
Make sure the unit is assembled properly.
WARNING
Hold the unit down firmly so you do not lose control
while cranking. If not held down properly engine could
not pull you off balance or swing the blade into an
obstruction or your body.
WARNING
Thoroughly inspect the area where the unit is to be used
and remove all stones, sticks, wire and other objects
that could cause injury if thrown at high speeds.
CAUTION
Removing the cutter guard can cause damage to the
drive shaft/cable (not covered by warranty) and cause
serious injury to operator and others.
●
DO NOT use any accessory or attachment other than those
supplied by the manufacturer for use with this particular unit.
●
Use only for jobs explained in this manual.
●
Inspect the entire units before each use for worm, Loose
or damaged parts. DO NOT use until the unit is in proper
working order.
●
Pay attention to your surroundings during operation. Make
sure to maintain a distance of at least 15 m from anyone and
anything (e,g., pets and objects) nearby. This will protect you
and others from accidents and injuries caused by loose grass
and flying objects.
●
Do not touch the blade when the engine is running. This will
protect you and others from accidents and injuries.
WARNING
To avoid serious injury, shut down immediately if the
unit starts to shake or vibrate.
This could be a sign of danger from broken part or
missing fasteners.
WARNING
To avoid serious injury after shutting down the engine,
keep fingers and feet away from the blade until all
rotation stops.
IMPORTANT
The thickness of branches which may be cut using this
trimmer is limited to up to Approximately 5mm. Never try
to cut branches thicker than this, as doing so may result
in damage to the trimmer.
MAINTENANCE AND ADJUSTMENT
Gear Case and Blades Lubrication
Lubricate the gear case every 20 hours.
WARNING
Hot engine parts can cause severe burns.
Allow engine to stop, and cool before lubricating the
gear case.
●
Disconnect the spark plug cap
from the spark plug.
●
Inject grease into the gear case
through 3 grease nipples with a
grease gun.
●
Apply a few drops of machine
oil to blades on each refueling.
WARNING
Cutter blades can cause severe injury.
Wear gloves to protect hands when handling cutter
blades.
B
C
D
B
A
A. Gear Case
B. Grease Nipple
C. Cutter Blades
D. Machine Oil