OceanDMX RC
.
2021 INSTALL & OPERATION MANUAL
15
2.7.1 DMX JUNCTION BOX INSTALLATION - X-SERIES
Mounting the DMX Junction Box
Once a suitable location has been found, use the following steps to mount the unit:
1. Unscrew the 4 case screws on the box and remove the lid.
2. The mounting holes for the unit are located inside the box, near to each corner - see diagram below.
3. Mark out the required mounting hole centres and drill pilot holes as required
– being careful to check for
obstructions such as cables / pipes behind the area being drilled.
4. Screw the unit to the surface using the screws provided.
4x MOUNTING HOLES
ø3.90mm [0.153 in]
87mm
[3.425 in]
167mm
[6.575 in]
