OceanDMX RC
.
2021 INSTALL & OPERATION MANUAL
19
3
Operation
3.1 POWERING ON THE SYSTEM
o
Before powering up the system, ensure the necessary connections are made and suitable fuses are installed
o
Power on the system
o
Use remote to control the lighting system (follow the instructions in the paragraph
3.3
for the remote functions)
3.2 GENERAL OPERATION
When not in use to save power, the system should be turned off (lights and receiver unit), via the system power switch.
It is recommended to turn the lights on and off via the system power switch (rather than the remote). Then after power
is restored, the lights will return to their previous colour setting.
3.3 COLOUR REMOTE FUNCTIONS
To enable the white channel only, ensure the white channel is on (by clicking the ‘W’ button in the centre of
the colour wheel
– the hue of the lights should change to a more pastel shade) and then double click the W+
button to toggle off the RGB channels (this may sometimes need to be double clicked twice).
DO NOT expose the device to moisture; please use provided waterproof pouch.
Touch colour wheel
Zone number: Click to choose the
zone/zones. (Lights as default will always
be on zone 1)
Click to switch Cool White, Neutral White,
Warm White mixed by RGB, double click
to toggle RGB channels on/off.
Press and hold down to save colours.
Click to recall the saved colours
White channel: the 4
th
channel Click to
turn on/off. Press and hold down to
increase/decrease light intensity of W
(white) channel
Press and hold down to decrease light
intensity of RGB channels
Click to play / pause the 10 built-in effects,
Press and hold down to speed up/down
the running effect.
The effects are run in cycle, so each time
play / pause is selected it goes to next
effect.
Press and hold down to increase light
intensity of RGB channels
Click to turn ON/OFF all zones
Indicator: shows the active state of the
remote control
