OceanDMX RC
.
2021 INSTALL & OPERATION MANUAL
13
2.6 INSTALLATION
– PRO-SERIES
The DMX standard recommends a maximum of 32 devices to be connected in one chain. If installation
requires more lights than this, please contact OceanLED for advice.
1. Connect the DMX control cable to the DMX input of the first driver box. The DMX output of this box should be
connected to the input of the next, and so on up to the last driver in the chain.
The power supply to the DMX Receiver should be fused with 500mA inline fuse (not supplied).
2. Fit the supplied terminator to the output of the last driver box. See the following example of the connections:
DMX Receiver
DMX Link Cable - 1x
3m (supplied with
each light)
Optional PSU for AC powered
installations (not supplied)
Remote
Colour
FUSE
PSU
12/24V DC
AC POWER
110/220V
AC DRIVER
DMX IN
DMX OUT
AC DRIVER
DMX IN
DMX OUT
AC DRIVER
DMX IN
DMX OUT
AC DRIVER
POWER IN
POWER IN
POWER IN
POWER IN
POWER IN
POWER IN
DMX IN
DMX OUT
110/220V AC
110/220V AC
110/220V AC
110/220V AC
DMX
Control Cable
–
5m
(supplied)
FUSE/
BREAKER
SWITCH
TERMINATOR
POWER CABLING
(not supplied)
