OceanDMX RC
.
2021 INSTALL & OPERATION MANUAL
24
If using a third party RDM controller, please follow the instructions provided with the unit.
If using the Explore Configuration interface, follow the instructions provided with the interface to change the DMX base
address of the lights as required.
4.3 CHANGING DMX ADDRESS
– PRO-SERIES
To change the DMX address of the Pro-Series lights, the switch positions on the 9-way DIP switch inside the driver box
need to be adjusted as follows:
Ensure power is turned off to the driver box before opening!
1. Turn off power to the driver box.
2. Open the driver box and locate the 9-way DIP switch on the driver card PCB (see photo below).
3. Change the DMX address to the required zone as follows:
DMX DIP Switch Settings
Zone 1
DMX base address 1
1 ON, 2 to 9 OFF (default)
Zone 2:
DMX base address 5
1 ON, 2 OFF, 3 ON, 4 to 9 OFF
Zone 3:
DMX base address 9
1 ON, 2 & 3 OFF, 4 ON, 5 to 9 OFF
Zone 4:
DMX base address 13
1 ON, 2 OFF, 3 & 4 ON, 5 to 9 OFF
4. Close the driver and turn the power back on. (Note when changing DMX address the driver needs to be power
cycled to make the change take effect).
