OceanDMX RC
.
2021 INSTALL & OPERATION MANUAL
9
2.4 ELECTRICAL CONNECTIONS
FUNCTION
DESCRIPTION
POWER
+12V DC
POWER +VE
-12V DC
POWER -VE
CONTROL
OUTPUT
SHIELD
CABLE SHIELD/ SCREEN IF AVAILABLE
DMX -
DMX SIGNAL -VE
DMX +
DMX VE
GND
DMX GROUND
PWR SW
POWER SWITCH (ONLY X-SERIES)
Table 1: DMX Receiver Connections
1. Loosen the cable glands caps and feed the DMX control cable and power cable through the corresponding cable
glands.
2. Connect the bare ends of the
12v/24v DC power wires to the ‘Power’ green push-in terminals, then connect the
bare ends of DMX control cable wires to the ‘Control Output’ green push-in terminals. Follow the table below for
the different kits as supplied.
Power 12/24v DC
DMX Control
Output
Learn Switch
Learn
LED indicator
Figure 1: DMX Receiver Overview
Power
Cable
Control
Cable
